Tripp Lite 4-Port HDMI over Cat5/6 Extender/Splitter, Box-Style Transmitter, Video/Audio, 1080/60p, Intl Power Supply, Up to 61 m

The B126-004-INT 4-Port HDMI over Cat5/Cat6 Extender/Splitter works with Tripp Lite B126-Series remote receivers to split a single HDMI audio/video signal into five separate signals—one local and four remote. It’s ideal for digital signs, trade shows, presentations, retail settings and other applications where the video source is located farther than conventional cables allow or that require multiple displays connected to one source. The B126-004-INT uses HDMI cable (see Tripp Lite’s P568-Series) to connect to the source and the local monitor and Cat5e/6 cable to transmit to the remote monitors (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series).When used with Tripp Lite’s B126-1A0 or B126-1A0-WP-1 active remote receivers, the B126-004-INT can extend a 1080i (60 Hz) signal up to 61 m, a 1080p signal (60 Hz) up to 45.7 m and a 3D signal up to 38.1 m. With a B126-1P0 or B126-1P0-WP-1 passive remote receiver, it can extend a 1080i (60 Hz) signal up to 30.5 m and a 1080p (60 Hz) signal up to 15.2 m.By daisy-chaining up to three B126-004-INT units, one video source can transmit to as many as 13 monitors—one local and 12 remote. Add up to three B126-110 remote repeaters to each channel to fully extend the signal range or add more displays.Easy to set up with no software or drivers to install, the unit mounts to a wall, rack or pole using the included hardware.Extends High-Definition Signals ● Exte

Technical details
HDCP	Yes
Audio output channels	7.1 channels
Plug and Play	Yes
Daisy chain	Yes
Type	AV transmitter
Maximum resolution	1600 x 1200 pixels
Cable types supported	Cat5e,Cat6
Maximum transfer distance	61 m
Supported video modes	480i,480p,720p,1080i,1080p
Supported graphics resolutions	640 x 480 (VGA),800 x 600 (SVGA),1024 x 768 (XGA),1440 x 900 (WXGA+),1600 x 1200 (UXGA)
Ports & interfaces
3.5 mm (1/8-inch) in	Yes
RJ-45 input ports	4
HDMI in	2
Audio (L,R) out	1
Indication
LED indicators	Yes
Operational conditions
Operating relative humidity (H-H)	20 - 90%
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Weight & dimensions
Dimensions (WxDxH)	127 x 101.6 x 28.6 mm
Packaging content
Mounting kit	Yes
Cables included	HDMI
Manual	Yes

At IT Networks Trade, we aim to deliver reliable IT hardware and components with transparency and quality assurance. Please review the following terms and conditions before placing your order:

1. 1. Non-Returnable Products:

      • Any product that is not a 3D memory item becomes non-returnable and non-cancellable once processed.

      • A restocking fee of up to 25% may apply on certain products, depending on the product category.

   2. Product Condition:

      • All products are shipped as refurbished by default, unless selected otherwise for new retail condition at the time of order.

   3. Shipping & Availability:

      • Items are typically dispatched within 24 hours, subject to stock availability.

      • For same-day shipping requests, please contact our customer support at (512) 881 3587.

      • Our online shipping calculator estimates costs for items under 5 lbs. For heavier equipment (e.g., servers, motherboards, racks), shipping costs may differ — our customer service team will confirm before finalizing the order.

   4. Manufacturer Part Numbers:

      • Many manufacturers (such as HP, Dell, IBM, and Compaq) assign corresponding Spare Part Numbers (Spare P/N#) or Field Replacement Unit Numbers (FRU#) to their products.

      • The received item may display one of these numbers, which are valid replacements for the ordered part.

      • For assistance verifying compatibility, contact our Sales Department.

   5. Warranty Policy:

      • Most items include a 30-day limited DOA (Dead on Arrival) exchange warranty for replacement with the same part only.

      • Some drives may carry a 90-day warranty—please confirm with our sales team.

      • Additional warranties (manufacturer, service, or extended) may also apply depending on the product.

   6. Product Packaging & Accessories:

      • All items are bulk equipment and typically do not include drivers or CDs. Contact us to confirm availability if you require installation media.

      • Product images are for illustrative purposes only—the actual product may differ slightly.

      • Packaging may vary (e.g., OEM or plain bulk packaging) depending on stock and order quantity.

      • Refurbished printers may not include toners or full ink cartridges.

   7. End-of-Life (EOL) Products:

      • EOL items that are no longer in production may be replaced with a compatible equivalent featuring the same FRU number and functionality.

   8. Contact & Support:

      • For any concerns or questions regarding product conditions, shipping, or compatibility, please reach out to:
        📧 support@itnetworkstrade.com
        ☎️ (512) 881 3587

No reviews to show!