Tripp Lite 4 x 4 HDMI over Cat5 / Cat6 Matrix Splitter Switch, Box-Style Transmitter, Video and Audio, 1080p @ 60 Hz, Up to 53.34 m (175-ft.)

The B126-4X4 4-port HDMI over Cat5/Cat6 Matrix Splitter Switch works with Tripp Lite remote receivers to share one or more HDMI sources between multiple projectors, monitors or televisions. It’s ideal for digital signs, trade shows, presentations, retail and other applications where the video sources are located farther than conventional cables allow or that require multiple displays connected to one source. It uses HDMI cable (see Tripp Lite’s P568-Series) to connect to the sources and Cat5e/6 cable to transmit to the remote monitors (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series). Any video source can be routed to any monitor, or you can send the same source to multiple monitors. Switch between inputs via pushbuttons, RS-232 serial or the included remote control. When used with Tripp Lite’s B126-1A0 or B126-1A0-WP-1 active remote receivers, the switch can extend a 1080i (60 Hz) signal up to 53.34 m (175-ft.) or a 1080p signal (60 Hz) up to 38.1 m (125-ft.). With a B126-1P0 or B126-1P0-WP-1 passive remote receiver, it can extend a 1080i (60 Hz) signal up to 22.86 m (75-ft.) and a 1080p (60 Hz) signal up to 15.24 m (50-ft.) Add up to three B126-110 remote repeaters to each channel to fully extend the signal range or add more displays. In addition to crystal-clear video, the B126-4X4 delivers full, rich stereo. Easy to set up with no software or drivers to install. Mounts to a wall, rack or pole using the in

Technical details
Quantity	1
Ethernet LAN	Yes
Cable types supported	Cat5,Cat6
Maximum transfer distance	53.34 m
Supported video modes	1080i
Colour of product	Black
Ports & interfaces
RJ-45 input ports	4
Number of HDMI outputs	4
Indication
LED indicators	Yes

At IT Networks Trade, we aim to deliver reliable IT hardware and components with transparency and quality assurance. Please review the following terms and conditions before placing your order:

1. 1. Non-Returnable Products:

      • Any product that is not a 3D memory item becomes non-returnable and non-cancellable once processed.

      • A restocking fee of up to 25% may apply on certain products, depending on the product category.

   2. Product Condition:

      • All products are shipped as refurbished by default, unless selected otherwise for new retail condition at the time of order.

   3. Shipping & Availability:

      • Items are typically dispatched within 24 hours, subject to stock availability.

      • For same-day shipping requests, please contact our customer support at (512) 881 3587.

      • Our online shipping calculator estimates costs for items under 5 lbs. For heavier equipment (e.g., servers, motherboards, racks), shipping costs may differ — our customer service team will confirm before finalizing the order.

   4. Manufacturer Part Numbers:

      • Many manufacturers (such as HP, Dell, IBM, and Compaq) assign corresponding Spare Part Numbers (Spare P/N#) or Field Replacement Unit Numbers (FRU#) to their products.

      • The received item may display one of these numbers, which are valid replacements for the ordered part.

      • For assistance verifying compatibility, contact our Sales Department.

   5. Warranty Policy:

      • Most items include a 30-day limited DOA (Dead on Arrival) exchange warranty for replacement with the same part only.

      • Some drives may carry a 90-day warranty—please confirm with our sales team.

      • Additional warranties (manufacturer, service, or extended) may also apply depending on the product.

   6. Product Packaging & Accessories:

      • All items are bulk equipment and typically do not include drivers or CDs. Contact us to confirm availability if you require installation media.

      • Product images are for illustrative purposes only—the actual product may differ slightly.

      • Packaging may vary (e.g., OEM or plain bulk packaging) depending on stock and order quantity.

      • Refurbished printers may not include toners or full ink cartridges.

   7. End-of-Life (EOL) Products:

      • EOL items that are no longer in production may be replaced with a compatible equivalent featuring the same FRU number and functionality.

   8. Contact & Support:

      • For any concerns or questions regarding product conditions, shipping, or compatibility, please reach out to:
        📧 support@itnetworkstrade.com
        ☎️ (512) 881 3587

No reviews to show!